FLOWTECH 0W-16 4L
PRODUCT DESCRIPTION
This product has excellent speed bearing protection, excellent sludge control and compatibility with polymeric materials which are used in hybrid engines. Hybrid engines tend to operate at load/speed conditions related to high efficiency points to maximize fuel efficiency. Also, the engine does not operate all the time due to the introduction of start/stop technology, fuel shut off during deceleration, etc. Thus, engine oil tends to run cooler than a normal engine. This product is specifically developed to lubricate perfectly in these circumstances. It provides the performance needed for the most recent requirements for gasoline-fu-elled US and Asian (i.e. Honda,Toyota,Mitsubishi) passenger cars.
BENEFITS
This Lubricant provides the following benefits when used as recommended:
- Complies with the stringent API SN quality requirements, thus contributing to better engine performance and greater fuel
- Suitable for vehicles for which the ILSAC GF-5 quality level is recommended: Fiat, Lancia, SsangYong and
- 3E Technology (Excellent Engine Efficiency): Technology that offers excellent protection for the engine against the formation of deposits at high temperature, greater control of sludge and compatibility with gaskets achieving the maximum efficiency, even with engines that use fuels with ethanol up to This helps to keep the engine cleaner and increases its durability.
- Its viscosity helps to reduce fuel consumption (2.6% according to the VID ASTM D7589 sequence test), thus maintaining protection and also reducing CO2 emissions to the atmosphere, which results in lower environmental impact.
TYPICAL CHARACTERISTICS
MOTOR ENGINE OIL OW16
API GRADE SN
FLASH POINT, °C 230
POUR POINT, °C -45
VISCOSITY AT 40°C, CST 34.6
VISCOSITY AT 100°C, CST 6.8
VISCOSITY INDEX 160
TOTAL BASE NO., MIN. 7.3
CREDENTIALS & SPECIFICATIONS
- API SN ILSAC GF-5
FLOWTECH 0W-20 4L
PRODUCT DESCRIPTION
This product has excellent speed bearing protection, excellent sludge control and compatibility with polymeric materials which are used in hybrid engines. Hybrid engines tend to operate at load/speed conditions related to high efficiency points to maximize fuel efficiency. Also, the engine does not operate all the time due to the introduction of start/stop technology, fuel shut off during deceleration, etc. Thus, engine oil tends to run cooler than a normal engine. This product is specifically developed to lubricate perfectly in these circumstances. It provides the performance needed for the most recent requirements for gasoline-fu-elled US and Asian (i.e. Honda,Toyota,Mitsubishi) passenger cars.
BENEFITS
This Lubricant provides the following benefits when used as recommended:
- Complies with the stringent API SN quality requirements, thus contributing to better engine performance and greater fuel
- Suitable for vehicles for which the ILSAC GF-5 quality level is recommended: Fiat, Lancia, SsangYong and
- 3E Technology (Excellent Engine Efficiency): Technology that offers excellent protection for the engine against the formation of deposits at high temperature, greater control of sludge and compatibility with gaskets achieving the maximum efficiency, even with engines that use fuels with ethanol up to This helps to keep the engine cleaner and increases its durability.
- Its viscosity helps to reduce fuel consumption (2.6% according to the VID ASTM D7589 sequence test), thus maintaining protection and also reducing CO2 emissions to the atmosphere, which results in lower environmental impact.
TYPICAL CHARACTERISTICS
MOTOR ENGINE OIL OW16
API GRADE SN
FLASH POINT, °C 230
POUR POINT, °C -45
VISCOSITY AT 40°C, CST 34.6
VISCOSITY AT 100°C, CST 6.8
VISCOSITY INDEX 160
TOTAL BASE NO., MIN. 7.3
CREDENTIALS & SPECIFICATIONS
- API SN ILSAC GF-5
FLOWTECH 5W-30 4L
PRODUCT DESCRIPTION
This product has excellent speed bearing protection, excellent sludge control and compatibility with polymeric materials which are used in hybrid engines. Hybrid engines tend to operate at load/speed conditions related to high efficiency points to maximize fuel efficiency. Also, the engine does not operate all the time due to the introduction of start/stop technology, fuel shut off during deceleration, etc. Thus, engine oil tends to run cooler than a normal engine. This product is specifically developed to lubricate perfectly in these circumstances. It provides the performance needed for the most recent requirements for gasoline-fu-elled US and Asian (i.e. Honda,Toyota,Mitsubishi) passenger cars.
BENEFITS
This Lubricant provides the following benefits when used as recommended:
- Complies with the stringent API SN quality requirements, thus contributing to better engine performance and greater fuel
- Suitable for vehicles for which the ILSAC GF-5 quality level is recommended: Fiat, Lancia, SsangYong and
- 3E Technology (Excellent Engine Efficiency): Technology that offers excellent protection for the engine against the formation of deposits at high temperature, greater control of sludge and compatibility with gaskets achieving the maximum efficiency, even with engines that use fuels with ethanol up to This helps to keep the engine cleaner and increases its durability.
- Its viscosity helps to reduce fuel consumption (2.6% according to the VID ASTM D7589 sequence test), thus maintaining protection and also reducing CO2 emissions to the atmosphere, which results in lower environmental impact.
TYPICAL CHARACTERISTICS
MOTOR ENGINE OIL OW16
API GRADE SN
FLASH POINT, °C 230
POUR POINT, °C -45
VISCOSITY AT 40°C, CST 34.6
VISCOSITY AT 100°C, CST 6.8
VISCOSITY INDEX 160
TOTAL BASE NO., MIN. 7.3
CREDENTIALS & SPECIFICATIONS
- API SN ILSAC GF-5
FLOWTECH 5W-40 4L
PRODUCT DESCRIPTION
This product has excellent speed bearing protection, excellent sludge control and compatibility with polymeric materials which are used in hybrid engines. Hybrid engines tend to operate at load/speed conditions related to high efficiency points to maximize fuel efficiency. Also, the engine does not operate all the time due to the introduction of start/stop technology, fuel shut off during deceleration, etc. Thus, engine oil tends to run cooler than a normal engine. This product is specifically developed to lubricate perfectly in these circumstances. It provides the performance needed for the most recent requirements for gasoline-fu-elled US and Asian (i.e. Honda,Toyota,Mitsubishi) passenger cars.
BENEFITS
This Lubricant provides the following benefits when used as recommended:
- Complies with the stringent API SN quality requirements, thus contributing to better engine performance and greater fuel
- Suitable for vehicles for which the ILSAC GF-5 quality level is recommended: Fiat, Lancia, SsangYong and
- 3E Technology (Excellent Engine Efficiency): Technology that offers excellent protection for the engine against the formation of deposits at high temperature, greater control of sludge and compatibility with gaskets achieving the maximum efficiency, even with engines that use fuels with ethanol up to This helps to keep the engine cleaner and increases its durability.
- Its viscosity helps to reduce fuel consumption (2.6% according to the VID ASTM D7589 sequence test), thus maintaining protection and also reducing CO2 emissions to the atmosphere, which results in lower environmental impact.
TYPICAL CHARACTERISTICS
MOTOR ENGINE OIL OW16
API GRADE SN
FLASH POINT, °C 230
POUR POINT, °C -45
VISCOSITY AT 40°C, CST 34.6
VISCOSITY AT 100°C, CST 6.8
VISCOSITY INDEX 160
TOTAL BASE NO., MIN. 7.3
CREDENTIALS & SPECIFICATIONS
- API SN ILSAC GF-5
FLOWTECH 10W-30 4L
PRODUCT DESCRIPTION
This product has excellent speed bearing protection, excellent sludge control and compatibility with polymeric materials which are used in hybrid engines. Hybrid engines tend to operate at load/speed conditions related to high efficiency points to maximize fuel efficiency. Also, the engine does not operate all the time due to the introduction of start/stop technology, fuel shut off during deceleration, etc. Thus, engine oil tends to run cooler than a normal engine. This product is specifically developed to lubricate perfectly in these circumstances. It provides the performance needed for the most recent requirements for gasoline-fu-elled US and Asian (i.e. Honda,Toyota,Mitsubishi) passenger cars.
BENEFITS
This Lubricant provides the following benefits when used as recommended:
- Complies with the stringent API SN quality requirements, thus contributing to better engine performance and greater fuel
- Suitable for vehicles for which the ILSAC GF-5 quality level is recommended: Fiat, Lancia, SsangYong and
- 3E Technology (Excellent Engine Efficiency): Technology that offers excellent protection for the engine against the formation of deposits at high temperature, greater control of sludge and compatibility with gaskets achieving the maximum efficiency, even with engines that use fuels with ethanol up to This helps to keep the engine cleaner and increases its durability.
- Its viscosity helps to reduce fuel consumption (2.6% according to the VID ASTM D7589 sequence test), thus maintaining protection and also reducing CO2 emissions to the atmosphere, which results in lower environmental impact.
TYPICAL CHARACTERISTICS
MOTOR ENGINE OIL OW16
API GRADE SN
FLASH POINT, °C 230
POUR POINT, °C -45
VISCOSITY AT 40°C, CST 34.6
VISCOSITY AT 100°C, CST 6.8
VISCOSITY INDEX 160
TOTAL BASE NO., MIN. 7.3
CREDENTIALS & SPECIFICATIONS
- API SN ILSAC GF-5
FLOWTECH 10W-40 4L
PRODUCT DESCRIPTION
This product has excellent speed bearing protection, excellent sludge control and compatibility with polymeric materials which are used in hybrid engines. Hybrid engines tend to operate at load/speed conditions related to high efficiency points to maximize fuel efficiency. Also, the engine does not operate all the time due to the introduction of start/stop technology, fuel shut off during deceleration, etc. Thus, engine oil tends to run cooler than a normal engine. This product is specifically developed to lubricate perfectly in these circumstances. It provides the performance needed for the most recent requirements for gasoline-fu-elled US and Asian (i.e. Honda,Toyota,Mitsubishi) passenger cars.
BENEFITS
This Lubricant provides the following benefits when used as recommended:
- Complies with the stringent API SN quality requirements, thus contributing to better engine performance and greater fuel
- Suitable for vehicles for which the ILSAC GF-5 quality level is recommended: Fiat, Lancia, SsangYong and
- 3E Technology (Excellent Engine Efficiency): Technology that offers excellent protection for the engine against the formation of deposits at high temperature, greater control of sludge and compatibility with gaskets achieving the maximum efficiency, even with engines that use fuels with ethanol up to This helps to keep the engine cleaner and increases its durability.
- Its viscosity helps to reduce fuel consumption (2.6% according to the VID ASTM D7589 sequence test), thus maintaining protection and also reducing CO2 emissions to the atmosphere, which results in lower environmental impact.
TYPICAL CHARACTERISTICS
MOTOR ENGINE OIL OW16
API GRADE SN
FLASH POINT, °C 230
POUR POINT, °C -45
VISCOSITY AT 40°C, CST 34.6
VISCOSITY AT 100°C, CST 6.8
VISCOSITY INDEX 160
TOTAL BASE NO., MIN. 7.3
CREDENTIALS & SPECIFICATIONS
- API SN ILSAC GF-5
FLOWTECH 15W-40 4L
PRODUCT DESCRIPTION
This product has excellent speed bearing protection, excellent sludge control and compatibility with polymeric materials which are used in hybrid engines. Hybrid engines tend to operate at load/speed conditions related to high efficiency points to maximize fuel efficiency. Also, the engine does not operate all the time due to the introduction of start/stop technology, fuel shut off during deceleration, etc. Thus, engine oil tends to run cooler than a normal engine. This product is specifically developed to lubricate perfectly in these circumstances. It provides the performance needed for the most recent requirements for gasoline-fu-elled US and Asian (i.e. Honda,Toyota,Mitsubishi) passenger cars.
BENEFITS
This Lubricant provides the following benefits when used as recommended:
- Complies with the stringent API SN quality requirements, thus contributing to better engine performance and greater fuel
- Suitable for vehicles for which the ILSAC GF-5 quality level is recommended: Fiat, Lancia, SsangYong and
- 3E Technology (Excellent Engine Efficiency): Technology that offers excellent protection for the engine against the formation of deposits at high temperature, greater control of sludge and compatibility with gaskets achieving the maximum efficiency, even with engines that use fuels with ethanol up to This helps to keep the engine cleaner and increases its durability.
- Its viscosity helps to reduce fuel consumption (2.6% according to the VID ASTM D7589 sequence test), thus maintaining protection and also reducing CO2 emissions to the atmosphere, which results in lower environmental impact.
TYPICAL CHARACTERISTICS
MOTOR ENGINE OIL OW16
API GRADE SN
FLASH POINT, °C 230
POUR POINT, °C -45
VISCOSITY AT 40°C, CST 34.6
VISCOSITY AT 100°C, CST 6.8
VISCOSITY INDEX 160
TOTAL BASE NO., MIN. 7.3
CREDENTIALS & SPECIFICATIONS
- API SN ILSAC GF-5
FLOWTECH SAE-50 5L
PRODUCT DESCRIPTION
This product has excellent speed bearing protection, excellent sludge control and compatibility with polymeric materials which are used in hybrid engines. Hybrid engines tend to operate at load/speed conditions related to high efficiency points to maximize fuel efficiency. Also, the engine does not operate all the time due to the introduction of start/stop technology, fuel shut off during deceleration, etc. Thus, engine oil tends to run cooler than a normal engine. This product is specifically developed to lubricate perfectly in these circumstances. It provides the performance needed for the most recent requirements for gasoline-fu-elled US and Asian (i.e. Honda,Toyota,Mitsubishi) passenger cars.
BENEFITS
This Lubricant provides the following benefits when used as recommended:
- Complies with the stringent API SN quality requirements, thus contributing to better engine performance and greater fuel
- Suitable for vehicles for which the ILSAC GF-5 quality level is recommended: Fiat, Lancia, SsangYong and
- 3E Technology (Excellent Engine Efficiency): Technology that offers excellent protection for the engine against the formation of deposits at high temperature, greater control of sludge and compatibility with gaskets achieving the maximum efficiency, even with engines that use fuels with ethanol up to This helps to keep the engine cleaner and increases its durability.
- Its viscosity helps to reduce fuel consumption (2.6% according to the VID ASTM D7589 sequence test), thus maintaining protection and also reducing CO2 emissions to the atmosphere, which results in lower environmental impact.
TYPICAL CHARACTERISTICS
MOTOR ENGINE OIL OW16
API GRADE SN
FLASH POINT, °C 230
POUR POINT, °C -45
VISCOSITY AT 40°C, CST 34.6
VISCOSITY AT 100°C, CST 6.8
VISCOSITY INDEX 160
TOTAL BASE NO., MIN. 7.3
CREDENTIALS & SPECIFICATIONS
- API SN ILSAC GF-5
FLOWTECH SAE-70 5L
PRODUCT DESCRIPTION
This product has excellent speed bearing protection, excellent sludge control and compatibility with polymeric materials which are used in hybrid engines. Hybrid engines tend to operate at load/speed conditions related to high efficiency points to maximize fuel efficiency. Also, the engine does not operate all the time due to the introduction of start/stop technology, fuel shut off during deceleration, etc. Thus, engine oil tends to run cooler than a normal engine. This product is specifically developed to lubricate perfectly in these circumstances. It provides the performance needed for the most recent requirements for gasoline-fu-elled US and Asian (i.e. Honda,Toyota,Mitsubishi) passenger cars.
BENEFITS
This Lubricant provides the following benefits when used as recommended:
- Complies with the stringent API SN quality requirements, thus contributing to better engine performance and greater fuel
- Suitable for vehicles for which the ILSAC GF-5 quality level is recommended: Fiat, Lancia, SsangYong and
- 3E Technology (Excellent Engine Efficiency): Technology that offers excellent protection for the engine against the formation of deposits at high temperature, greater control of sludge and compatibility with gaskets achieving the maximum efficiency, even with engines that use fuels with ethanol up to This helps to keep the engine cleaner and increases its durability.
- Its viscosity helps to reduce fuel consumption (2.6% according to the VID ASTM D7589 sequence test), thus maintaining protection and also reducing CO2 emissions to the atmosphere, which results in lower environmental impact.
TYPICAL CHARACTERISTICS
MOTOR ENGINE OIL OW16
API GRADE SN
FLASH POINT, °C 230
POUR POINT, °C -45
VISCOSITY AT 40°C, CST 34.6
VISCOSITY AT 100°C, CST 6.8
VISCOSITY INDEX 160
TOTAL BASE NO., MIN. 7.3
CREDENTIALS & SPECIFICATIONS
- API SN ILSAC GF-5
FLOWTECH 15W-40 4L
PRODUCT DESCRIPTION
This product has excellent speed bearing protection, excellent sludge control and compatibility with polymeric materials which are used in hybrid engines. Hybrid engines tend to operate at load/speed conditions related to high efficiency points to maximize fuel efficiency. Also, the engine does not operate all the time due to the introduction of start/stop technology, fuel shut off during deceleration, etc. Thus, engine oil tends to run cooler than a normal engine. This product is specifically developed to lubricate perfectly in these circumstances. It provides the performance needed for the most recent requirements for gasoline-fu-elled US and Asian (i.e. Honda,Toyota,Mitsubishi) passenger cars.
BENEFITS
This Lubricant provides the following benefits when used as recommended:
- Complies with the stringent API SN quality requirements, thus contributing to better engine performance and greater fuel
- Suitable for vehicles for which the ILSAC GF-5 quality level is recommended: Fiat, Lancia, SsangYong and
- 3E Technology (Excellent Engine Efficiency): Technology that offers excellent protection for the engine against the formation of deposits at high temperature, greater control of sludge and compatibility with gaskets achieving the maximum efficiency, even with engines that use fuels with ethanol up to This helps to keep the engine cleaner and increases its durability.
- Its viscosity helps to reduce fuel consumption (2.6% according to the VID ASTM D7589 sequence test), thus maintaining protection and also reducing CO2 emissions to the atmosphere, which results in lower environmental impact.
TYPICAL CHARACTERISTICS
MOTOR ENGINE OIL OW16
API GRADE SN
FLASH POINT, °C 230
POUR POINT, °C -45
VISCOSITY AT 40°C, CST 34.6
VISCOSITY AT 100°C, CST 6.8
VISCOSITY INDEX 160
TOTAL BASE NO., MIN. 7.3
CREDENTIALS & SPECIFICATIONS
- API SN ILSAC GF-5